8.0 Inch 800×1280 USB 3.1 TFT LCD Display with CTP

В 8.0 inch TFT LCD display with capacitive touch is a compact interactive display solution for embedded equipment where installation space is limited. Its 800×1280 resolution provides a tall screen format, while the integrated G+G touch panel enables direct interaction. The compact mechanical design and mounting provisions make it suitable for space-conscious product development.

• 800×1280 Resolution – Supports a tall display layout for portrait-oriented interfaces.
• Integrated G+G Touch Panel – Provides direct interaction with compatible embedded interfaces.
• Five-Point Touch – Supports up to 5 simultaneous touch points.
• I²C Communication – The GT911 touch controller uses I²C communication.
• OCA-Bonded Structure – Integrates the touch and display layers into a compact module.
• Mechanical Integration – Four M3 mounting holes are included in the mechanical design.

Это 8.0 inch TFT LCD display with capacitive touch is designed for compact embedded equipment where screen space is limited but direct user interaction is required. Its tall display format, integrated touch panel and compact mechanical structure provide a practical foundation for portable devices, control interfaces and space-conscious product designs.

• Compact Interactive Display – The 8-inch format provides a balance between usable screen area and installation space.
• Portrait-Friendly Format – The 800×1280 resolution is suitable for interfaces designed around a taller screen layout.
• Integrated Capacitive Touch – G+G construction supports direct interaction with embedded interfaces.
• I²C Touch Communication – The GT911-based touch system communicates through I²C.
• Compact Mechanical Integration – The defined module dimensions and mounting points simplify enclosure planning.
• Embedded Product Development – Suitable for compact control terminals, portable equipment and interactive devices.

Если монитор дисплея нуждается в стабильной работе в течение длительного времени, не только требует, чтобы фабрика имела различную производственную систему (ISO9001 / IATF16949 / ISO13485), но также PCBA нуждается в длительном сроке службы

ЖК с 100% сделанным AOI во время производственного процесса FOG. Количество проводящих частиц в IC составляет не менее 5, в FPC 10.

ПХД 100% с погружением Золотой процесс для обеспечения сильной износостойкости, отличной электропроводности и надежности сварки

• Настройка LCM и CTP pinout
• Настройка FPC и кабеля
• Настройка корпуса для проще сборки
• Мы сделали крышку стекла как ваш запрос. LOGO/Цвет/Форма/Толщина. ..
• Настройте фоновое освещение, яркость и толщина могли быть изменены
• Настройка интерфейса, TTL/LVDS/MIPI/EDP/DP/HDMI/Type-C/VGA/USB-A